STAPLE FIBER AFTERTREATMENT

For careful and effective treatment of staple fibers.

Features

1. Fiber fleece transport via wire mesh conveyor
2. Pressing devices between separate sections
3. Automatic belt tension system
4. Automatic belt alignment control system
5. Frequency converter controlled single drives
6. Special materials for treatment sections

In Detail

Fiber staples which come from the spinning machine still contain pollutants such as sulphuric acid, sodium sulphate, zinc sulphate, carbon bisulphide, finely-distributed sulphur and residual xanthate which must be removed. Furthermore, the fibers must reach a certain grade of whiteness and posses certain spinning characteristics. Aftertreatment is divided into the steps detailed above.

Fiber fleece is transported through the treatment areas with fleece borders and small presses to the large press. Each treatment area has a separate sprinkler and collecting trough. The softening section has a separate belt conveyor.